Special Slings For Petroleum Pipeline for Heavy Lifting

A wide body spreads the lifting force over a larger surface area, reducing pressure on thin-walled pipes and preventing denting or ovalization during the lift.

Yes. We customize sling width, length, and eye reinforcement to match your pipe diameter, weight, and lifting geometry for balanced, stable handling.

Yes. We offer coatings and protective sleeves that extend sling life in abrasive pipeline yards and outdoor storage environments.

Pipeline slings are manufactured to EN 1492-2 with safety factors of 5:1, 6:1, and 7:1. Rated loads are based on U-type (basket) lifting configuration. Test reports and batch MTC can be provided for project documentation.

The special plastic anti-slip finish on the sling-to-pipe contact surface increases friction, reducing sideways movement and improving stability when lifting coated or smooth-wall pipes.

The sling is designed to separate automatically from beam hooks once the load is released, reducing manual handling and speeding up installation and removal cycles.

Retire when in doubt: Slings are cheap. The load (and lives) they protect are not. Pipeline slings lift coated pipe — check the wide contact face for abrasive wear where the pipe coating rubs, verify the anti-slip treatment is still effective, and watch the reinforced edge stitching and any exposed wear indicators that signal sleeve replacement. Withdraw immediately if you see cuts, abrasion, chemical damage, heat marks, missing labels, or any structural deformation.